◆云智能电源管理器，不只是简单的电源时序器，也不只是网络继电器，而是可以任意编程控制的管理中心。可管理八路/十六路大功率电源，每路包含抗电磁干扰的滤波器，可单独检测回传的电流电压和温度传感器，并有总电量检测和计算功能. Cloud Intelligent Power Manager is not just a simple powersequencer, and not just a network relays, but can be aprogrammablemanagement center.It can manage 8/16-way high-powerpower supply, each containing a filter against electromagneticinterference, can detect the current voltage and temperature, andthe total power detection and calculation functions are also inplace.
◆自带时钟的定时模块，可任意定时设置。每路继电器可编程的命令控制，适合各类设备兼容.
Built-intiming module to set time as needed.Each relay is programmable withcontrol command, suitable for all types of equipmentcompatible.
◆控制命令随意编写适应，可和相邻继电器设定互锁、自锁、非锁、延时等状态，适合各类控制要求.
The controlcommands are freely written and adapted, and can be interlockedwith the adjacent relays, self-locking, non-locking, delay, etc.,suitable for various control requirements.
◆通过电脑或手机、平板等，实时检测设备用电情况，可设定自动巡检，接收过载或断电报警，避免设备损坏引起的火灾等情况
Real-timedetection of equipment power consumption through computer or mobilephone, tablet, etc., can set automatic inspection, receive overloador power failure alarm, avoid fire caused by equipment damage,etc.
◆只需连接网线，无需设置端口号，输入相应的密码，即可在全球对设备进行控制。实现本地和远程管理维护.
Only connectthe network cable, no need to set the port number, enter thecorresponding password, you can control the equipmentglobally.
◆独有的网络传输控制功能，可以通过此电源管理控制器，控制任何232或485的设备，实现任意编程的中央控制功能.
The uniquenetwork transmission control function can control any 232 or 485device through this power management controller to realize thecentral control function of any programming.
◆前面板带有彩色OLED显示屏，可实时显示各继电器的工作设定状态和吸合状态，每路的电流电压和温度显示，网络ID的设定，每路继电器的收发命令状态，多个按键的发码设定和管理.