加压后的风再分别通过每层的百叶窗或风阀送往每层的前室或楼梯间。当消防前室或楼梯间的通风压力或压差超过设定值(前室25~30Pa,楼梯间40-50Pa)时,电梯前室压力传感器厂家,位于每层的压力传感器顺即时发出信号报警输入旁通泄压阀控制箱,旁通泄压阀控制箱根据压力传感器的信号打开旁通泄压阀,旁通泄压阀打开后,部分加压送风机送往风管的风通过旁路风管经过旁通泄压阀回到风机前端(红色箭头位置)
Thecompressed air is then sent to the front room or stairwell of eachfloor through the shutters or the air valve. When the ventilationpressure or pressure difference in the fire chamber or Stairwellexceeds the set value (25 ~ 30 PA in the Front Chamber and 40-50 PAin the Stairwell) , the pressure sensor located on each floorimmediately sends a signal to the by-pass pressure relief valvecontrol box, the by-pass Pressure Relief Valve control box opensthe by-pass pressure relief valve according to the signal of thepressure sensor, part of the pressurized air supply fan to the airduct through the Bypass Air Duct by-pass Relief Valve back to theFan Front (Red Arrow ition)
前室压力探测器
The company specializes in fire wind pressure sensors, elevatorroom air pressure sensors fire wind pressure sensors, elevator roomair pressure sensors, HLB-016 pressure difference/pressuresensor/pressure sensor, itive pressure supply air pressure sensor, AIR SUPPLY OUTLET PRESSURE SENSOR,电梯前室压力传感器安装位置, ElevatorChamber pressure sensor, Stairwell Pressure Sensor,
公司消防风压力传感器,电梯前室风压传感器
消防风压力传感器,电梯前室风压传感器,HLB-016压差/压力感控器/压力传感器,正压送风压力传感器,电梯前室压力传感器价格,正压送风口压力传感器,电梯前室压力传感器
本公司研发生产的HLB-016前室传感器在防排烟系统或正压送风系统中,通常标注为压力传感器,电梯前室压力传感器,分别用△P或P来表示。压力传感器是一种用来测量两个压力之间差值的传感HLB-016前室传感器在防排烟系统或正压送风系统中,通常标注为压力传感器,分别用△P或P来表示防排烟系统或正压送风系统中,通常标注为压力传
电梯前室压力传感器-紫旭空调传感器批发由武城县豪鲁邦空调设备有限公司提供。武城县豪鲁邦空调设备有限公司是从事“正压送风成套设备,前室压力传感器成套系统,安装升降机系列”的企业,公司秉承“诚信经营,用心服务”的理念,为您提供更好的产品和服务。欢迎来电咨询!联系人:危经理。